How to set up a kitchen display and ticket printers
Pair an Android tablet as your kitchen display, show every accepted order on the line and print kitchen tickets automatically on your Wi-Fi printers.
Paper tickets get lost and a shouted order gets misheard. Growtality’s kitchen display system puts every accepted order on a screen at the line, with the guest’s dietary needs and notes on the ticket, and the cook taps Mark ready when it’s up. If your kitchen prefers paper, Growtality can print a ticket for every order you accept as well.
Before you start
- An Android tablet for the kitchen, connected to your restaurant’s Wi-Fi.
- If you want printed tickets, a network kitchen printer on the same Wi-Fi. Star TSP100 printers and printers that use ESC/POS are supported.
- Permission to change settings in Growtality.
Step 1: Install the KDS app
On the kitchen tablet, install Growtality KDS from Google Play. Open it and it shows a pairing screen asking for a 6-digit code.
Step 2: Pair the tablet with your restaurant
A kitchen display stays signed in for good, so nobody gets logged out mid-service. You connect it once with a pairing code.
- In Growtality, choose the location the tablet is for, then go to Settings > Ordering & fulfillment > Kitchen displays.
- Generate a pairing code and give the display a name that says where it lives, such as “Grill” or “Pass”.
- Type the code on the tablet and select Pair device.
The code is valid for 10 minutes. Once the tablet is paired, it appears in your list of paired displays, where you can see when it was last online.
Step 3: Run service from the display
Orders appear on the display as soon as they’re accepted on the Orders page, so the kitchen only sees food it needs to make. Each ticket shows:
- the order type and how long it has been on the board
- the items, with any modifiers and bundle contents
- guest preferences, such as “Vegetarian, always”, and any special requests or notes for this order
Tap a ticket to open it full screen. When the food is up, tap Mark ready. The order leaves the display and moves to Ready on the Orders page, so front of house and drivers know it’s waiting.
If the tablet loses Wi-Fi, the board shows Reconnecting… and catches up when it’s back.
Display settings
Open Settings on the tablet to:
- turn the New-order sound on or off
- switch to Dark mode, which is easier to read in a dim kitchen
- check which location the display is paired to and whether it’s connected
The screen stays awake while the app is open.
Step 4: Add your kitchen printers (optional)
- Find the printer’s IP address on its self-test page. On most printers, you print this by holding the feed button while you switch the printer on. You can also find it from the tablet: open Settings on the KDS app and select Find printers on this Wi-Fi, then copy the address.
- In Growtality, go to Settings > Ordering & fulfillment > Kitchen printers and select Add printer.
- Enter a Printer name that appears on tickets, such as “Kitchen” or “Bar”, and the IP address. The Port is almost always 9100.
- Choose the Printer type: Star TSP100 for Star printers, ESC/POS for everything else.
- Choose the Paper width, 80 mm or 58 mm. If the right edge of tickets is cut off, try 64 mm for the print area.
- Save the printer, then turn on Auto-print, so every order you accept prints a ticket.
Browsers can’t print to kitchen printers directly, so a device in the restaurant sends the tickets. On the kitchen display, open Settings and turn on Print tickets here. The tablet must stay on the same Wi-Fi as the printers. The Manager app can do the same job.
Back in the KDS app’s settings, each printer shows Ready or Offline. Select Test print to check it. On the board, each ticket shows whether it has printed, and you can retry a ticket that didn’t print.
When a printer is being repaired, turn it off in Kitchen printers. It gets no tickets until you turn it on again.
Rename or remove a display
In Settings > Ordering & fulfillment > Kitchen displays, you can rename a display without unpairing it, or revoke it. A revoked tablet stops receiving orders straight away and asks for a new code. You can also unpair a tablet from its own Settings screen with Unpair this device.
Common questions
Which orders show on the kitchen display?
Every order you accept. Once an order is accepted on the Orders page it appears on the display straight away, and it leaves the display when the kitchen marks it ready.
What device do I need for a kitchen display?
An Android tablet with the Growtality KDS app from Google Play, connected to your restaurant's Wi-Fi. The screen stays on while the app is open, so a wall-mounted tablet works well.
How long does a pairing code last?
10 minutes. If it runs out before you type it on the tablet, generate a new one.
Can I print kitchen tickets from a computer browser?
No. Browsers can't print to kitchen printers directly. A kitchen display or the Manager app on the same Wi-Fi as the printer sends the tickets.
What happens if I revoke a display?
The tablet stops receiving orders straight away and asks to be paired again. To use it again, generate a new code.
Still stuck? Submit a ticket
Tell us what you're trying to do. We'll attach this guide to your ticket, so you don't have to explain it twice.